ortlieb halterung für lenkertasche Handlebar Mounting-Set Support bike-exchange Size:LG, 700c Camping am Forggensee: Radfahren,

ortlieb halterung für lenkertasche Handlebar Mounting-Set Support bike-exchange Size:LG, 700c Camping am Forggensee: Radfahren,

Camping am Forggensee: Radfahren, Wandern & Baden im Allgäu

The behavior of helix angle when working with bevel gears is incorrect.try this: create a bevel gear along with it's pair using the inherit from parent option, but make sure the pair is not 1:1 (bevel angles different than 45 degrees)then section view the teeth meshing zone: everything will be finenow add a helix twist to the first bevel gear, the inherited gear will then become twisted as wellbut now if you section view, you get this nonsense:the behavior here is that the INHERIT mode wrongly copies the helix angle over to the second gearas can be seen here, this is the correct behavior: how the smaller gear has a steeper helix angle because it rotates faster compared to the large gearin here, the helix angle must be multiplied by the reduction factor (sin(ba1)/sin(ba2)) where ba1 is the bevel angle of the large gear and ba2 that of the smaller gearbut this if the helix angle represents the amount of twist per unit length along the pitch cone generatorthe helix angle in this feature-script seems to be defined in another way which I must account forand after about 6 hours of trial and error I could not yet deduce exactly what the expression h2=f(h1) should be such that the helix no longer has any interferencewill have to come back to this once I derive the aforementioned expression0 matthew_stacy Member Posts: 489 PRO@antlu65, you have my compliments and deepest respect

bike-exchange

Size:LG, 700c

Capriciously giving everyone doing this halfway seriously a 25% pay cut was needless shrinkflation